Overview
Features:
In an enterprise office network, to isolate network access between different departments and prevent PC infection from affecting the entire network, it is necessary to divide the interior into different VLANs, isolate broadcast domains and improve network stability. Ernitec switches provide a convenient and flexible way to divide VLANs, allowing you to assign ports to different VLANs as needed. Users in different VLANs do not affect each other, creating a more stable network for users.
Flexible VLAN Division:
The L2+ managed switches provide IP-MAC-Port Binding, Port Security, Storm control, and DHCP Snoopingwhich protect against broadcast storms, ARP attacks, etc. It integrates some typical DoS attacks to select. Youcan protect against these attacks more easily ever than before. In addition, the Access Control Lists (ACL, L2 toL4) feature restricts access to sensitive network resources by denying packets based on source and destination.
MAC address, IP address, TCP/UDP ports, and even VLAN ID. Moreover, the switch supports 802.1Xauthentication, which is used in conjunction with a RADIUS/TACACS+ server to require some authentication information before access to the network is allowed.
Networking Security:
Abundant L2+ Features:
The L2+ managed switches support a complete lineup of L2 features, including 802.1Q VLAN,Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol and 802.3x Flow Control function. Any more, the switch provides advanced features for network maintenance. Such as Loopback Detection and IGMP Snooping. IGMP snooping ensures the switch intelligently forward the multicast stream only to the appropriate subscribers while
IGMP thronging & filtering restrict each subscriber on a port level to prevent unauthorized multicast access. Moreover, L2+ managed switches support L2+ feature-static routing, which is a simple way to provide segmentation of the network with internal routing through the switch and helps network traffic for more efficient use.
Easy Network Operation and Maintenance:
It supports SNMP, RMON, Syslog, backup log and configuration, and other features for daily network diagnosis and maintenance. At the same time, administrators can use CLI (command line interface), Web network management, TELNET, and other diversified management and maintenance methods to facilitate device maintenance management. For the WEB network management method, we provide a friendly configuration interface. You can easily use the mouse to realize the above VLAN division, address binding, security protection, and other functions in the graphical interface.
Hardware Specifications:
48x10/100/1000Mbps PoE+ Ports
1xConsole Port
4x10G SFP Slots
Built-in switching power supply: AC 100~240V 50/60HZ
Port Standard:
IEEE 802.3
IEEE 802.3u 100BASE-TX
IEEE 802.3ab1000BASE-T
IEEE 802.3x
IEEE 802.3ae: 10 Gigabit Ethernet over flber
IEEE 802.3af/at
IEEE 802.3ad
IEEE 802.3q 、IEEE 802.3q/p
IEEE 802.1w、IEEE 802.1d 、IEEE 802.1S
PoE
PoE Standard
PoE Ports
PoE Power Budget
802.3af/at
48, up to 30W per port
565W
Packet Forwarding Rate 184.64Mpps
Jumbo Frame 16kB
MAC Address Table 16K
DDR 2G DDR3 1333MHz
Fan Quantity 2
Power Consumption Full loading without PoE ≤ 35W
Switching Capacity 5126Gbps
FLASH 64M
DRAM 256M
Dimensions( W x D x H ) Product Size: 440mm*360mm*45mm
Package dimensions: 553mm*403mm*95mm
Net weight/gross weight 5.6kg/6.45kg
48~52 port:
PW
Off: the device is power off or failed
On: the device power on is normal
SYS:
Blinking: device on and normal operation
1~48: (Data indicator is green）
Off: ports link down
On: ports link up
Blinking: data on TX/RX
1~48 port:(POE indicator is yellow）
Off: PoE not working
On: PoE working
（The optical port indicator is green）
Off: ports link down
On: ports link up
Blinking: data on TX/RX